Warning: These documents are under active development and subject to change (version 2.1.0-beta).
The latest release documents are at: https://purl.dataone.org/architecture

Coordinating Node APIs

The service interfaces described here are exposed through the Coordinating Node REST interface to support interactions with Member Nodes and DataONE clients.

The following table provides a list of API methods exposed by Coordinating Nodes.

Tier:The tier in which a method is grouped.
Version:Version of API method is available. The lowest version number indicates when the method was added. A version number in parentheses indicates the method is available in that version and is unchanged from the previous version. If more than one version number is present, then the method signature or functionality has changed between API versions. e.g. “1.0, 2.0” indicates that the method was first introduced in Version 1.0 and has been modified in Version 2.0.
REST:The HTTP method and path relative to the Base URL. Parameters specified in the URL are indicatd by braces. Note that parameters included in a path MUST be properly path encoded, and parameters included as key, value pairs MUST also be properly encoded.
Function:The function name, associated with an API grouping.
Parameters:Indicates the parameters used when calling the method (sent in the message payload) and the return type.
Methods for CN component
Tier Version REST Function Parameters
Tier 1 1.0, (2.0) GET /monitor/ping CNCore.ping() () -> null
Tier 1 1.0, 2.0 POST /object CNCore.create() (session, pid, object, sysmeta) -> Types.Identifier
Tier 1 1.0, 2.0 GET /formats CNCore.listFormats() () -> Types.ObjectFormatList
Tier 1 1.0, 2.0 GET /formats/{formatId} CNCore.getFormat() (formatId) -> Types.ObjectFormat
Tier 1 1.0, 2.0 GET /log?[fromDate={fromDate}][&toDate={toDate}][&event={event}][&idFilter={idFilter}][&start={start}][&count={count}] CNCore.getLogRecords() (session, [fromDate], [toDate], [event], [idFilter], [start], [count]) -> Types.Log
Tier 1 1.0, 2.0 POST /reserve CNCore.reserveIdentifier() (session, id) -> Types.Identifier
Tier 1 1.0, (2.0) POST /generate CNCore.generateIdentifier() (session, scheme, [fragment]) -> Types.Identifier
Tier 1 1.0, (2.0) GET /checksum CNCore.listChecksumAlgorithms() () -> Types.ChecksumAlgorithmList
  1.0, 2.0 PUT /obsoletedBy/{pid} CNCore.setObsoletedBy() (session, pid, obsoletedByPid, serialVersion) -> boolean
Tier 3 1.0, (2.0) DELETE /object/{id} CNCore.delete() (session, id) -> Types.Identifier
Tier 3 1.0, 2.0 PUT /archive/{id} CNCore.archive() (session, id) -> Types.Identifier
Tier 1 1.0, 2.0 GET /node CNCore.listNodes() () -> Types.NodeList
Tier 1 1.0, 2.0 GET / CNCore.getCapabilities() () -> Types.Node
Tier 1 1.0, 2.0 POST /meta CNCore.registerSystemMetadata() (session, pid, sysmeta) -> Types.Identifier
Tier 1 2.0 PUT /meta CNCore.updateSystemMetadata() (session, pid, sysmeta) -> boolean
  1.0, 2.0 GET /reserve/{id}?subject={subject} CNCore.hasReservation() (session, subject, id) -> boolean
Tier 1 1.0, 2.0 GET /object/{id} CNRead.get() (session, id) -> Types.OctetStream
Tier 1 1.0, 2.0 GET /meta/{id} CNRead.getSystemMetadata() (session, id) -> Types.SystemMetadata
Tier 1 1.0, 2.0 HEAD /object/{id} CNRead.describe() (session, id) -> Types.DescribeResponse
Tier 1 1.0, 2.0 GET /resolve/{id} CNRead.resolve() (session, id) -> Types.ObjectLocationList
Tier 1 1.0, (2.0) GET /checksum/{pid} CNRead.getChecksum() (session, pid) -> Types.Checksum
Tier 1 1.0, (2.0) GET /object[?fromDate={fromDate}&toDate={toDate}&identifier={identifier}&formatId={formatId}&nodeId={nodeId}&start={start}&count={count}] CNRead.listObjects() (session, [fromDate], [toDate], [formatId], [identifier], [start=0], [count=1000], [nodeId]) -> Types.ObjectList
Tier 1 1.0, (2.0) GET /search/{queryType}/{query} CNRead.search() (session, queryType, query) -> Types.ObjectList
Tier 1 1.1, (2.0) GET /query/{queryEngine}/{query} CNRead.query() (session, queryEngine, query) -> Types.OctetStream
Tier 1 1.1, (2.0) GET /query/{queryType} CNRead.getQueryEngineDescription() (session, queryEngine) -> Types.QueryEngineDescription
Tier 1 1.1, (2.0) GET /query CNRead.listQueryEngines() (session) -> Types.QueryEngineList
Tier 1 2.0 POST /synchronize CNRead.synchronize() (session, pid) -> boolean
Tier 2 1.0, 2.0 PUT /owner/{id} CNAuthorization.setRightsHolder() (session, id, userId, serialVersion) -> Types.Identifier
Tier 2 1.0, 2.0 GET /isAuthorized/{id}?action={action} CNAuthorization.isAuthorized() (session, id, action) -> boolean
Tier 2 1.0, 2.0 PUT /accessRules/{id} CNAuthorization.setAccessPolicy() (session, id, accessPolicy, serialVersion) -> boolean
Tier 2 1.0, (2.0) POST /accounts CNIdentity.registerAccount() (session, person) -> Types.Subject
Tier 2 1.0, (2.0) PUT /accounts/{subject} CNIdentity.updateAccount() (session, subject, person) -> Types.Subject
Tier 2 1.0, (2.0) PUT /accounts/verification/{subject} CNIdentity.verifyAccount() (session, subject) -> boolean
Tier 2 1.0, (2.0) GET /accounts/{subject} CNIdentity.getSubjectInfo() (session, subject) -> Types.SubjectInfo
Tier 2 1.0, (2.0) GET /accounts?query={query}[&status={status}&start={start}&count={count}] CNIdentity.listSubjects() (session, query, status, start, count) -> Types.SubjectInfo
Tier 2 1.0, (2.0) POST /accounts/map CNIdentity.mapIdentity() (session, primarySubject, secondarySubject) -> boolean
Tier 2 1.0, (2.0) DELETE /accounts/map/{subject} CNIdentity.removeMapIdentity() (session, subject) -> boolean
Tier 2 1.0, (2.0) POST /accounts/pendingmap CNIdentity.requestMapIdentity() (session, subject) -> boolean
Tier 2 1.0, (2.0) PUT /accounts/pendingmap/{subject} CNIdentity.confirmMapIdentity() (session, subject) -> boolean
Tier 2 1.0, (2.0) GET /accounts/pendingmap/{subject} CNIdentity.getPendingMapIdentity() (session, subject) -> Types.SubjectInfo
Tier 2 1.0, (2.0) DELETE /accounts/pendingmap/{subject} CNIdentity.denyMapIdentity() (session, subject) -> boolean
Tier 2 1.0, (2.0) POST /groups CNIdentity.createGroup() (session, group) -> Types.Subject
Tier 2 1.0, (2.0) PUT /groups CNIdentity.updateGroup() (session, group) -> boolean
Tier 4 1.0, (2.0) PUT /replicaNotifications/{pid} CNReplication.setReplicationStatus() (session, pid, nodeRef, status, failure) -> boolean
Tier 4 1.0, (2.0) PUT /replicaMetadata/{pid} CNReplication.updateReplicationMetadata() (session, pid, replicaMetadata, serialVersion) -> boolean
Tier 4 1.0, 2.0 PUT /replicaPolicies/{id} CNReplication.setReplicationPolicy() (session, id, policy, serialVersion) -> boolean
Tier 4 1.0, (2.0) GET /replicaAuthorizations/{pid}?targetNodeSubject={targetNodeSubject} CNReplication.isNodeAuthorized() (session, targetNodeSubject, pid) -> boolean
  1.0, (2.0) PUT /removeReplicaMetadata/{pid} CNReplication.deleteReplicationMetadata() (session, pid, nodeId, serialVersion) -> boolean
Tier 2 1.0, 2.0 PUT /node/{nodeid} CNRegister.updateNodeCapabilities() (session, nodeid, node) -> boolean
Tier 2 1.0, 2.0 GET /node/{nodeid} CNRegister.getNodeCapabilities() (nodeid) -> Types.Node
Tier 2 1.0, 2.0 POST /node CNRegister.register() (session, node) -> Types.NodeReference
Tier 1 2.0 GET /views/{theme}/{id} CNView.view() (session, theme, id) -> Types.OctetStream
Tier 1 2.0 GET /views CNView.listViews() (session) -> Types.OptionList
Tier 2 2.0 GET /diag/subject CNDiagnostic.echoCredentials() (session) -> Types.SubjectInfo
Tier 1 2.0 POST /diag/sysmeta CNDiagnostic.echoSystemMetadata() (session, sysmeta) -> Types.SystemMetadata
Tier 1 2.0 POST /diag/object CNDiagnostic.echoIndexedObject() (session, queryEngine, sysmeta, object) -> Types.OctetStream

Diagnostic API

Functions defined in CNDiagnostic
Tier Version REST Function Parameters
Tier 2 2.0 GET /diag/subject echoCredentials() (session) -> Types.SubjectInfo
Tier 1 2.0 POST /diag/sysmeta echoSystemMetadata() (session, sysmeta) -> Types.SystemMetadata
Tier 1 2.0 POST /diag/object echoIndexedObject() (session, queryEngine, sysmeta, object) -> Types.OctetStream
CNDiagnostic.echoCredentials(session) → SubjectInfo

Echo the credentials used to make the call. This method can be used to verify the client certificate is valid and contains the expected information.

v2.0: This method was added to the Version 2.0 API.

Version:

2.0

REST URL:

GET /diag/subject

Parameters:

session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate. Transmitted as part of the SSL handshake process.

Returns:

The subjects and groups parsed from the supplied session information.

Return type:

Types.SubjectInfo

Raises:
CNDiagnostic.echoSystemMetadata(session, sysmeta) → SystemMetadata

Parse and echo the provided system metadata

On successful parsing, a copy of the system metadata is returned, otherwise an exception is returned indicating an error condition.

v2.0: This operation is new to version 2.0.

Version:

2.0

REST URL:

POST /diag/sysmeta

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the x.509 certificate. The service MAY choose to limit access to only authorized users. Transmitted as part of the SSL handshake process.
  • sysmeta (Types.SystemMetadata) – A SystemMetadata object to be examined. The object is parsed and error conditions reported by an exception response. On successful parsing, the SystemMetadata object is echoed back with a HTTP 200 status. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

A copy of the supplied System Metadata.

Return type:

Types.SystemMetadata

Raises:
CNDiagnostic.echoIndexedObject(session, queryEngine, sysmeta, object) → OctetStream

Parse and echo the provided science metadata or resource map document. The response is governed by the type of object provided in the request, and on success is one or more documents that are the result of parsing for indexing.

Since DataONE supports multiple types of query engine, the query engine to be used for parsing is specified in the request.

The servce may terminate the POST operation if the size of the object is beyond a reasonable size.

v2.0: This operation is new to version 2.0.

Version:

2.0

REST URL:

POST /diag/object

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the x.509 certificate. The service MAY choose to limit access to only authorized users. Transmitted as part of the SSL handshake process.
  • queryEngine (string) – A valid query engine name as reported by listQueryEngines() Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • sysmeta (Types.SystemMetadata) – A SystemMetadata object that passes the echoSystemMetadata diagnostic. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
  • object (bytes) – A document (e.g. science metadata or resource map) that is to be evalauted for indexing.
Returns:

A document representing the parsed object as it would be prior to being added to a search index. For the solr query engine for example, this would be the equivalent of a <add><doc> .. </doc> .. </add> structure with possibly multiple documents.

Return type:

Types.OctetStream

Raises:

Core API

Functions defined in CNCore
Tier Version REST Function Parameters
Tier 1 1.0, (2.0) GET /monitor/ping ping() () -> null
Tier 1 1.0, 2.0 POST /object create() (session, pid, object, sysmeta) -> Types.Identifier
Tier 1 1.0, 2.0 GET /formats listFormats() () -> Types.ObjectFormatList
Tier 1 1.0, 2.0 GET /formats/{formatId} getFormat() (formatId) -> Types.ObjectFormat
Tier 1 1.0, 2.0 GET /log?[fromDate={fromDate}][&toDate={toDate}][&event={event}][&idFilter={idFilter}][&start={start}][&count={count}] getLogRecords() (session, [fromDate], [toDate], [event], [idFilter], [start], [count]) -> Types.Log
Tier 1 1.0, 2.0 POST /reserve reserveIdentifier() (session, id) -> Types.Identifier
Tier 1 1.0, (2.0) POST /generate generateIdentifier() (session, scheme, [fragment]) -> Types.Identifier
Tier 1 1.0, (2.0) GET /checksum listChecksumAlgorithms() () -> Types.ChecksumAlgorithmList
  1.0, 2.0 PUT /obsoletedBy/{pid} setObsoletedBy() (session, pid, obsoletedByPid, serialVersion) -> boolean
Tier 3 1.0, (2.0) DELETE /object/{id} delete() (session, id) -> Types.Identifier
Tier 3 1.0, 2.0 PUT /archive/{id} archive() (session, id) -> Types.Identifier
Tier 1 1.0, 2.0 GET /node listNodes() () -> Types.NodeList
Tier 1 1.0, 2.0 GET / getCapabilities() () -> Types.Node
Tier 1 1.0, 2.0 POST /meta registerSystemMetadata() (session, pid, sysmeta) -> Types.Identifier
Tier 1 2.0 PUT /meta updateSystemMetadata() (session, pid, sysmeta) -> boolean
  1.0, 2.0 GET /reserve/{id}?subject={subject} hasReservation() (session, subject, id) -> boolean
CNCore.ping() → null

Low level “are you alive” operation. A valid ping response is indicated by a HTTP status of 200. A timestmap indicating the current system time (UTC) on the node MUST be returned in the HTTP Date header.

The Member Node should perform some minimal internal functionality testing before answering. However, ping checks will be frequent (every few minutes) so the internal functionality test should not be high impact.

Any status response other than 200 indicates that the node is offline for DataONE operations.

Note that the timestamp returned in the Date header should follow the semantics as described in the HTTP specifications, http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.18

The response body will be ignored by the caller expect in the case of an error, in which case the response body should contain the appropriate DataONE exception.

Version:

1.0, (2.0)

Use Cases:

UC10

REST URL:

GET /monitor/ping

Returns:

Null body or Exception. The body of the message is ignored by the caller. The HTTP header Date MUST be set in the response.

Return type:

null

Raises:

Response

The response should be a valid HTTP response with a blank or arbitrary body. Only the HTTP header information is considered by the requestor. A successful response MUST have a HTTP status code of 200. In case of an error condition, the appropriate HTTP status code MUST be set, and an exception or error information MAY be returned in the response body.

Example

Example of ping request and response for a Member Node (Coordinating Nodes implement the same functionality). Lines prefixed with “>” indicate outgoing information, lines prefixed with “<” show content returned from the server. Lines associated with SSL connection initiation and close are not shown here. Note that the actual response headers may vary, the only required header fields are the first status line and a Date entry. However, in order to fully support clients that may cache the response, it is recommended that the Expires, and Cache-Control headers are returned.

export NODE="https://demo2.test.dataone.org/knb/d1/mn"
curl -k -v "$NODE/v1/monitor/ping"

> GET /knb/d1/mn/v1/monitor/ping HTTP/1.1
> User-Agent: curl/7.21.6 (x86_64-pc-linux-gnu) libcurl/7.21.6
  OpenSSL/1.0.0e zlib/1.2.3.4 libidn/1.22 librtmp/2.3
> Host: demo2.test.dataone.org
> Accept: */*
>
< HTTP/1.1 200 OK
< Date: Tue, 06 Mar 2012 14:19:59 GMT
< Server: Apache/2.2.14 (Ubuntu)
< Content-Length: 0
< Content-Type: text/plain
<
CNCore.create(session, pid, object, sysmeta) → Identifier

Used internally within a Coordinating Node to add a new object to the object store.

This method is not publicly exposed by a Coordinating Node.

v2.0: The structure of v2_0.Types.SystemMetadata has changed from Version 1.

Version:

1.0, 2.0

Use Cases:

UC04, UC09, UC16

REST URL:

POST /object

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – The identifier that should be used in DataONE to identify and access the object. This is an Unicode string that follows the constraints on identifiers described in Identifiers in DataONE. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • object (bytes) – The object (e.g. Science Metadata) bytes.
  • sysmeta (Types.SystemMetadata) – The complete system metadata document describing the object. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

The identifier that was used to insert the document into the system. This should be the same as the identifier provided as the pid parameter.

Return type:

Types.Identifier

Raises:
CNCore.listFormats() → ObjectFormatList

Returns a list of all object formats registered in the DataONE Object Format Vocabulary.

v2.0: The structure of v2_0.Types.ObjectFormat has changed.

Version:

1.0, 2.0

REST URL:

GET /formats

Returns:

The list of object formats registered in the DataONE Object Format Vocabulary

Return type:

Types.ObjectFormatList

Raises:

Example

curl "http://cn.dataone.org/cn/v1/formats"

<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="/cn/xslt/dataone.types.v1.xsl"?>
<d1:objectFormatList xmlns:d1="http://ns.dataone.org/service/types/v1" count="67" start="0" total="67">
  <objectFormat>
    <formatId>-//ecoinformatics.org//eml-access-2.0.0beta4//EN</formatId>
    <formatName>Ecological Metadata Language, Access module, version 2.0.0beta4</formatName>
    <formatType>METADATA</formatType>
  </objectFormat>
  <objectFormat>
    <formatId>-//ecoinformatics.org//eml-attribute-2.0.0beta4//EN</formatId>
    <formatName>Ecological Metadata Language, Attribute module, version 2.0.0beta4</formatName>
    <formatType>METADATA</formatType>
  </objectFormat>
  <objectFormat>
    <formatId>-//ecoinformatics.org//eml-constraint-2.0.0beta4//EN</formatId>
    <formatName>Ecological Metadata Language, Constraint module, version 2.0.0beta4</formatName>
    <formatType>METADATA</formatType>
  </objectFormat>
  ...
</d1:objectFormatList>
CNCore.getFormat(formatId) → ObjectFormat

Returns the object format registered in the DataONE Object Format Vocabulary for the given format identifier.

v2.0: The structure of v2_0.Types.ObjectFormat has changed.

Version:

1.0, 2.0

REST URL:

GET /formats/{formatId}

Parameters:

formatId (Types.ObjectFormatIdentifier) – Unique ObjectFormatIdentifier for the object format Transmitted as part of the URL path and must be escaped accordingly.

Returns:

The object format registered in the DataONE Object Format Vocablulary

Return type:

Types.ObjectFormat

Raises:

Example

Retrieve information about the http://www.openarchives.org/ore/terms formatId. Note that formatId has characters that should be escaped when added as a URL path element. This is done using the urlencode script.

Note

The xml command is implemented by XMLStarlet, and is used here to format the output for easier reading. The urlencode command is a script available with the d1_client_bash itk tool

formatid=$(echo "http://www.openarchives.org/ore/terms" | urlencode)
curl -s "http://cn-dev.dataone.org/cn/v1/formats/${formatid}" | xml fo

<?xml version="1.0" encoding="UTF-8"?>
<d1:objectFormat xmlns:d1="http://ns.dataone.org/service/types/v1">
  <formatId>http://www.openarchives.org/ore/terms</formatId>
  <formatName>Object Reuse and Exchange Vocabulary</formatName>
  <formatType>RESOURCE</formatType>
</d1:objectFormat>
CNCore.getLogRecords(session[, fromDate][, toDate][, event][, idFilter][, start][, count]) → Log

Retrieves consolidated log information for the specified date range (fromDate < timestamp <= toDate) for the entire DataONE infrastructure

Note that date time precision is limited to one millisecond. If no timezone information is provided, the UTC will be assumed.

Note that full access to log records requires access through a priviledged account. A public user may be presented with an empty response.

v2.0: The structure of v2_0.Types.Log has changed.

v2.0: The event parameter has changed from v1_0.Types.Event to a plain string

Version:

1.0, 2.0

Use Cases:

UC16

REST URL:

GET /log?[fromDate={fromDate}][&toDate={toDate}][&event={event}][&idFilter={idFilter}][&start={start}][&count={count}]

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • fromDate (Types.DateTime) – Starting time for records in response, entries with timestamp greater than or equal to (>=) this value will be returned. Defaults to include all records. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • toDate (Types.DateTime) – End time for records in response, entries with timestamp less than (<) this value will be returned. If not specified, then defaults to now. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • event (Types.Event, string) – Return only log records for the specified type of event. Default is all. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • idFilter (string) – Return only log records for identifiers that start with the supplied identifier string. Support for this parameter is optional and MAY be ignored by the Coordinating Node implementation with no warning. Supports PID and SID values. Only PID values will be included in the returned entries. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • start (integer) – The zero based index of the first log record to return. Default is 0. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • count (integer) – The maximum number of log records that should be returned in the response. The Member Node may return fewer and the caller should check the total in the response to determine if further pages may be retrieved. Transmitted as a URL query parameter, and so must be escaped accordingly.
Returns:

Return type:

Types.Log

Raises:
CNCore.reserveIdentifier(session, id) → Identifier

Reserves the identifier that is unique and can not be used by any other sessions. Future calls to MNStorage.create() and MNStorage.update() that reference this ID must be made by the same principal making the reservation, otherwise an error is raised on those methods.

The requested identifier is transmitted in a MIME Multipart/form-data body with id as key, and the identifier string as value.

v2.0: The identifier being reserved may be used as a PID or SID.

Version:

1.0, 2.0

Use Cases:

UC16

REST URL:

POST /reserve

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – The identifier that is to be reserved. May be a PID or a SID value. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

The identifier that was reserved

Return type:

Types.Identifier

Raises:
CNCore.generateIdentifier(session, scheme[, fragment]) → Identifier

Given a scheme and optional fragment, generates an identifier with that scheme and fragment that is unique. Returned identifier may be used as either a PID or a SID.

The message body is encoded as MIME Multipart/form-data

Version:

1.0, (2.0)

Use Cases:

UC16

REST URL:

POST /generate

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • scheme (string) – The name of the identifier scheme to be used, drawn from a DataONE-specific vocabulary of identifier scheme names, including several common syntaxes such as DOI, ARK, LSID, UUID, and LSRN, among others. The first version of this method only supports the UUID scheme, and ignores the fragment parameter. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • fragment (string) – The optional fragment to include in the generated Identifier. This parameter is optional and may not be present in the message body. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

The identifier that was generated

Return type:

Types.Identifier

Raises:

Todo

Need to provide a list of recommended identifier schemes.

CNCore.listChecksumAlgorithms() → ChecksumAlgorithmList

Returns a list of checksum algorithms that are supported by DataONE.

Version:

1.0, (2.0)

REST URL:

GET /checksum

Returns:

A list of supported checksum algorithms.

Return type:

Types.ChecksumAlgorithmList

Raises:
  • Exceptions.NotImplemented

    (errorCode=501, detailCode=4880)

    The service is not implemented.

  • Exceptions.ServiceFailure

    (errorCode=500, detailCode=4881)

    A problem occurred with the service that prevented it from returning the expected response.

CNCore.setObsoletedBy(session, pid, obsoletedByPid, serialVersion) → boolean

Updates the Types.SystemMetadata.obsoletedBy property for an object, indicating that the object specified by pid has been obsoleted by the identifier in obsoletedByPid.

v2.0: Method implementation has changed to ensure that the obsolescence chain is consistent with use of any SID assigned to the object.

Version:

1.0, 2.0

REST URL:

PUT /obsoletedBy/{pid}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The Subject of the session MUST have write permission on the object. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – Identifier of the object system metadata being updated. Transmitted as part of the URL path and must be escaped accordingly.
  • obsoletedByPid (Types.Identifier) – Identifier of the object that obsoletes the object identified by pid. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • serialVersion (unsigned long) – The serial version of the system metadata being updated. If the specified serialVersion does not match the current version at the Coordinating Nodes, then a Exceptions.VersionMismatch error is raised and no changes are made. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

True if the operation succeeds, otherwise false.

Return type:

boolean

Raises:
  • Exceptions.NotImplemented

    (errorCode=501, detailCode=4940)

    The service endpoint has not yet been fully implemented

  • Exceptions.ServiceFailure

    (errorCode=500, detailCode=4941)

    A problem occurred with the service that prevented it from returning the expected response.

  • Exceptions.InvalidRequest

    (errorCode=400, detailCode=4942)

    The request was malformed and could not be processed.

  • Exceptions.InvalidToken

    (errorCode=401, detailCode=4943)

    The supplied session information could not be verified as a valid DataONE session.

  • Exceptions.NotFound

    (errorCode=404, detailCode=4944)

    The specified pid does not exist.

  • Exceptions.NotAuthorized

    (errorCode=401, detailCode=4945)

    The credentials provided with the request in the session do not have write privileges on pid.

  • Exceptions.VersionMismatch

    (errorCode=409, detailCode=4946)

    The provided serialVersion does not match the latest version that is held by the CN. The client should refresh it’s copy, verify that the update is still necessary, and resubmit the request with the updated information.

CNCore.delete(session, id) → Identifier

Deletes an object from the entire DataONE system, including all nodes known to hold a copy of the object. The PID and/or SID of the object will continue to be shown as in use (preventing its reuse for other objects), however the object should not be resolvable (NotFound) or retrievable.

The delete operation is used only by administrators in response to a request to remove an object from DataONE, perhaps because of legal requirements or the object has been identified as containing malicious content.

Version:

1.0, (2.0)

Use Cases:

UC16

REST URL:

DELETE /object/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – The identifier of the object to be deleted. May be either a PID or SID, the latter will operate on the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

The identifier of the object that was deleted.

Return type:

Types.Identifier

Raises:
CNCore.archive(session, id) → Identifier

Hides an object managed by DataONE from search operations, effectively preventing its discovery during normal operations.

The operation does not delete the object bytes, but instead sets the Types.SystemMetadata.archived flag to True. This ensures that the object can still be resolved (and hence remain valid for existing citations and cross references), though will not appear in searches.

Objects that are archived can not be updated through the MNStorage.update() operation.

Archived objects can not be un-archived. This behavior may change in future versions of the DataONE API.

The CN should ensure that all MNs holding a copy of the object are informed of the change so that they may update their information about the object.

v2.0: The supplied identifier may be a PID or a SID.

Version:

1.0, 2.0

REST URL:

PUT /archive/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – The identifier of the object to be archived. May be either a PID or a SID, the latter will act on the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

The identifier of the object that was archived.

Return type:

Types.Identifier

Raises:
CNCore.listNodes() → NodeList

Returns a list of nodes that have been registered with the DataONE infrastructure.

v2.0: The structure of v2_0.Types.Node has changed.

Version:

1.0, 2.0

Use Cases:

UC39

REST URL:

GET /node

Returns:

List of nodes from the registry

Return type:

Types.NodeList

Raises:
CNCore.getCapabilities() → Node

Returns a document describing the capabilities of the Coordinating Node.

v2.0: The structure of v2_0.Types.Node has changed.

Version:

1.0, 2.0

REST URL:

GET /

Returns:

The technical capabilities of the Coordinating Node

Return type:

Types.Node

Raises:
CNCore.registerSystemMetadata(session, pid, sysmeta) → Identifier

Provides a mechanism for adding system metadata independently of its associated object, such as when adding system metadata for data objects.

This method is used internally by Coordinating Nodes.

v2.0: The structure of v2_0.Types.SystemMetadata has changed.

Version:

1.0, 2.0

REST URL:

POST /meta

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • sysmeta (Types.SystemMetadata) – Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

The pid that was updated.

Return type:

Types.Identifier

Raises:
CNCore.updateSystemMetadata(session, pid, sysmeta) → boolean

Provides a mechanism for updating system metadata for any objects held in the federation.

Usage of this method SHOULD be restricted to CNs for updating the system metadata in the underlying CN storage sub-system.

v2.0: The structure of v2_0.Types.SystemMetadata has changed.

Note: the serial version and the replica list in the new system metadata will be ignored.

Version:

2.0

REST URL:

PUT /meta

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • sysmeta (Types.SystemMetadata) – Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

True if the update was successful.

Return type:

boolean

Raises:
CNCore.hasReservation(session, subject, id) → boolean

Checks to determine if the supplied subject is the owner of the reservation of id.

A positive response (that the pid is reserved and owned by subject) is indicated by a return of a HTTP status of 200.

A negative response is indicated by an exception and the associated HTTP status code.

v2.0: The identifier may be a PID or SID.

Version:

1.0, 2.0

REST URL:

GET /reserve/{id}?subject={subject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to an authority trusted by the DataONE Coordinating Nodes. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The subject of the principal (user) that made the reservation. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • id (Types.Identifier) – The identifier that is being checked for existing as a reserved identifier or is in use as an identifier for an existing object. May be either a PID or a SID. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

True - subject has the reservation on the PID; False - the PID does not exist; False - the PID is already in use; False - the PID is reserved by somone else.

Return type:

boolean

Raises:
  • Exceptions.NotImplemented

    (errorCode=501, detailCode=4920)

    The method functionality is not implemented.

  • Exceptions.ServiceFailure

    (errorCode=500, detailCode=4921)

    An internal server error occurred.

  • Exceptions.InvalidToken

    (errorCode=401, detailCode=4922)

    The session information is invalid.

  • Exceptions.NotFound

    (errorCode=404, detailCode=4923)

    The PID does not exist as a reservation or an existing object and is not in use as an identifier.

  • Exceptions.NotAuthorized

    (errorCode=401, detailCode=4924)

    The PID is reserved but the owner is not the principal identified by the subjectInfo OR the provide session does not have authority to access this service.

  • Exceptions.InvalidRequest

    (errorCode=400, detailCode=4925)

    The request was malformed and could not be processed

Read API

The CN_read API implements methods that enable object retrieval operations on a Coordinating Node. It includes searches of science metadata and system metadata and exposes log records held by CNs.

Functions defined in CNRead
Tier Version REST Function Parameters
Tier 1 1.0, 2.0 GET /object/{id} get() (session, id) -> Types.OctetStream
Tier 1 1.0, 2.0 GET /meta/{id} getSystemMetadata() (session, id) -> Types.SystemMetadata
Tier 1 1.0, 2.0 HEAD /object/{id} describe() (session, id) -> Types.DescribeResponse
Tier 1 1.0, 2.0 GET /resolve/{id} resolve() (session, id) -> Types.ObjectLocationList
Tier 1 1.0, (2.0) GET /checksum/{pid} getChecksum() (session, pid) -> Types.Checksum
Tier 1 1.0, (2.0) GET /object[?fromDate={fromDate}&toDate={toDate}&identifier={identifier}&formatId={formatId}&nodeId={nodeId}&start={start}&count={count}] listObjects() (session, [fromDate], [toDate], [formatId], [identifier], [start=0], [count=1000], [nodeId]) -> Types.ObjectList
Tier 1 1.0, (2.0) GET /search/{queryType}/{query} search() (session, queryType, query) -> Types.ObjectList
Tier 1 1.1, (2.0) GET /query/{queryEngine}/{query} query() (session, queryEngine, query) -> Types.OctetStream
Tier 1 1.1, (2.0) GET /query/{queryType} getQueryEngineDescription() (session, queryEngine) -> Types.QueryEngineDescription
Tier 1 1.1, (2.0) GET /query listQueryEngines() (session) -> Types.QueryEngineList
Tier 1 2.0 POST /synchronize synchronize() (session, pid) -> boolean
CNRead.get(session, id) → OctetStream

Retrieves the object identified by id from the node. If the object is not present on the node, then an Exceptions.NotFound error is raised, regardless of whether the object exists on another node in the DataONE system.

v2.0: The supplied identifier may be a PID or a SID.

Version:

1.0, 2.0

Use Cases:

UC01, UC16, UC09

REST URL:

GET /object/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – Identifier of the object to be retrieved. May be either a PID or a SID, the latter acting as if called using the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

For science metadata objects, this will be the exact byte stream of the science metadata object as it was original ingested. Note that additional object types may in the future be returned by the get method.

Return type:

Types.OctetStream

Raises:

Example

See MNRead.get() for additional details and examples.

CNRead.getSystemMetadata(session, id) → SystemMetadata

Returns the system metadata that contains DataONE specific information about the object identified by id. Authoritative copies of system metadata are only available from the Coordinating Nodes.

v2.0: The supplied identifier may be a PID or a SID and the returned v2_0.Types.SystemMetadata structure has changed.

Version:

1.0, 2.0

Use Cases:

UC36, UC37, UC16

REST URL:

GET /meta/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – Identifier for the object of interest. May be either a PID or a SID, the latter acts as if called with the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

A system metadata document describing the object.

Return type:

Types.SystemMetadata

Raises:

Example

See MNRead.getSystemMetadata() for additional details and examples.

CNRead.describe(session, id) → DescribeResponse

This method provides a lighter weight mechanism than CNRead.getSystemMetadata() for a client to determine basic properties of the referenced object. The response should indicate properties that are typically returned in a HTTP HEAD request: the date late modified, the size of the object, the type of the object (the SystemMetadata.formatId).

The principal indicated by token must have read privileges on the object, otherwise Exceptions.NotAuthorized is raised.

If the object does not exist on the node servicing the request, then Exceptions.NotFound must be raised even if the object exists on another node in the DataONE system.

Note that this method is likely to be called frequently and so efficiency should be taken into consideration during implementation.

v2.0: The supplied identifier may be a PID or a SID.

Version:

1.0, 2.0

Use Cases:

UC16

REST URL:

HEAD /object/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – Identifier for the object in question. May be either a PID or a SID, the latter acting as if called with the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

A set of values providing a basic description of the object.

Return type:

Types.DescribeResponse

Raises:

Examples

(HEAD) Retrieve information about the object with identifier “ABC123”:

curl -I http://mn1.dataone.org/mn/v1/object/ABC123

HTTP/1.1 200 OK
Last-Modified: Wed, 16 Dec 2009 13:58:34 GMT
Content-Length: 10400
Content-Type: application/octet-stream
DataONE-ObjectFormat: eml://ecoinformatics.org/eml-2.0.1
DataONE-Checksum: SHA-1,2e01e17467891f7c933dbaa00e1459d23db3fe4f
DataONE-SerialVersion: 1234

(HEAD) An error response to a describe() request for object “IDONTEXIST”:

curl -I http://mn1.dataone.org/mn/v1/object/IDONTEXIST

HTTP/1.1 404 Not Found
Last-Modified: Wed, 16 Dec 2009 13:58:34 GMT
Content-Length: 1182
Content-Type: text/xml
DataONE-Exception-Name: NotFound
DataONE-Exception-DetailCode: 1380
DataONE-Exception-Description: The specified object does not exist on this node.
DataONE-Exception-PID: IDONTEXIST
CNRead.resolve(session, id) → ObjectLocationList

Returns a list of nodes (MNs or CNs) known to hold copies of the object identified by id. The object resolution process is intended to provide a simple mechanism for a client to discover from which node(s) a particular object may be retrieved. Details about method interfaces (i.e. REST URLs) exposed by a particular node can be determined by examining the response from the node collection. For convenience, the MNRead.get() URL is included in the response as is the base URL of the node REST services.

Note also that the same functionality as resolve() can be implemented by retrieving a copy of the system metadata for the object and utilizing the node registry to discover the base URL from which the client can construct the get() URL. Resolve is provided for efficiency since the response size is much smaller.

Resolve will return a HTTP status of 303 (see other) on success. The HTTP header “Location” MUST be set, and it’s value SHOULD be the full get() URL for retrieving the object from the first location in the resolve response.

v2.0: The supplied identifier may be a PID or a SID. If the identifier is a SID, then resolution is for the latest version of an object (i.e. the head of the obsolescence chain).

Version:

1.0, 2.0

Use Cases:

UC36, UC16

REST URL:

GET /resolve/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – Identifier being resolved. May be either a PID or a SID, the latter acting as if called with the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

A list of nodes known to contain copies of the target object, plus the URLs known to resolve to the node get methods.

Return type:

Types.ObjectLocationList

Raises:

Examples

XML (default) in response to Accept: text/xml:

curl -X GET -H "Accept: text/xml" http://cn.dataone.org/object/resolve/1234
or
curl -X GET -H "Accept: */*" http://cn.dataone.org/object/resolve/1234

<objectLocationList xmlns:d1="http://ns.dataone.org/service/types/v1">
  <identifier>1234</identifier>
  <objectLocation>
    <nodeIdentifier>mn1</nodeIdentifier>
    <baseURL>http://mn1.dataone.org/mn</baseURL>
    <version>v1</version>
    <url>http://mn1.dataone.org/mn/object/1234</url>
  </objectLocation>
  <objectLocation>
    <nodeIdentifier>mn2</nodeIdentifier>
    <baseURL>http://mn2.dataone.org/mn</baseURL>
    <version>v1</version>
    <url>http://mn2.dataone.org/some_base/object/1234</url>
  </objectLocation>
  <objectLocation>
    <nodeIdentifier>cn1</nodeIdentifier>
    <baseURL>http://cn1.dataone.org/mn</baseURL>
    <version>v1</version>
    <url>http://cn1.dataone.org/cn/object/1234</url>
  </objectLocation>
  <objectLocation>
    <nodeIdentifier>cn2</nodeIdentifier>
    <baseURL>http://cn2.dataone.org/mn</baseURL>
    <version>v1</version>
    <url>http://cn2.dataone.org/cn/object/1234</url>
  </objectLocation>
  <objectLocation>
    <nodeIdentifier>cn3</nodeIdentifier>
    <baseURL>http://cn3.dataone.org/mn</baseURL>
    <version>v1</version>
    <url>http://cn3.dataone.org/cn/object/1234</url>
  </objectLocation>
</objectLocationList>
CNRead.getChecksum(session, pid) → Checksum

Returns the checksum for the specified object as reported in the system metadata.

Note that the signature of this method differs from MNRead.getChecksum() as that method takes an optional algorithm parameter.

Version:

1.0, (2.0)

Use Cases:

UC09

REST URL:

GET /checksum/{pid}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – Identifier of the object for which checksum is being requested Transmitted as part of the URL path and must be escaped accordingly.
Returns:

The checksum of the specified object

Return type:

Types.Checksum

Raises:
CNRead.listObjects(session[, fromDate][, toDate][, formatId][, identifier][, start=0][, count=1000][, nodeId]) → ObjectList

Retrieve the list of objects present on the CN that match the calling parameters. At a minimum, this method should be able to return a list of objects that match:

fromDate < SystemMetadata.dateSysMetadataModified

but is expected to also support date range (by also specifying toDate), and should also support slicing of the matching set of records by indicating the starting index of the response (where 0 is the index of the first item) and the count of elements to be returned.

Note that date time precision is limited to one millisecond. If no timezone information is provided, the UTC will be assumed.

Note that date time precision is limited to one millisecond. If no timezone information is provided, the UTC will be assumed.

V2.0: Added filter on authoritativeMemberNode value.

Version:

1.0, (2.0)

Use Cases:

UC06, UC16

REST URL:

GET /object[?fromDate={fromDate}&toDate={toDate}&identifier={identifier}&formatId={formatId}&nodeId={nodeId}&start={start}&count={count}]

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • fromDate (Types.DateTime) – Entries with SystemMetadata.dateSysMetadataModified greater than or equal to (>=) fromDate must be returned. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • toDate (Types.DateTime) – Entries with SystemMetadata.dateSysMetadataModified less than (<) toDate must be returned. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • formatId (Types.ObjectFormatIdentifier) – Restrict results to the specified object format. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • identifier (Types.Identifier) – Restrict results to the specified identifier. May be either a PID or a SID. If the latter, will return results for each PID in the series. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • start=0 (integer) – The zero-based index of the first value, relative to the first record of the resultset that matches the parameters. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • count=1000 (integer) – The maximum number of entries that should be returned in the response. The Member Node may return fewer and the caller should check the total in the response to determine if further pages may be retrieved. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • nodeId (Types.NodeReference) – Restrict results to those with authoritativeMemberNode equal to nodeId. Transmitted as a URL query parameter, and so must be escaped accordingly.
Returns:

The list of PIDs that match the query criteria. If none match, an empty list is returned.

Return type:

Types.ObjectList

Raises:
CNRead.search(session, queryType, query) → ObjectList

Search the metadata catalog and return identifiers of metadata records that match the criteria.

Search may be implemented by more than one type of search engine. The queryType parameter indicates which search engine should be targeted. The value and form of query is determined by the search engine.

Currently supported search engines include: “solr”

Version:

1.0, (2.0)

Use Cases:

UC02, UC16

REST URL:

GET /search/{queryType}/{query}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • queryType (string) – Indicates which search engine will be used to handle the query. Currently supported search engines include: “SOLR”. Transmitted as part of the URL path and must be escaped accordingly.
  • query (string) – The remainder of the URL is passed verbatim to the respective search engine implementation. Hence it may contain additional path elements and query elements as determined by the functionality of the search engine. The caller is reponsible for providing a ‘?’ to indicate the start of the query string portion of the URL, as well as proper URL escaping. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

A list of objects that match the specified search criteria

Return type:

Types.ObjectList

Raises:
CNRead.query(session, queryEngine, query) → OctetStream

Submit a query against the specified queryEngine and return the response as formatted by the queryEngine.

The query() operation may be implemented by more than one type of search engine and the queryEngine parameter indicates which search engine is targeted. The value and form of query is determined by the specific query engine.

For example, the solr search engine will accept many of the standard parameters of solr, including field restrictions and faceting.

v1.1: This method was added.

Version:

1.1, (2.0)

Use Cases:

UC02, UC16

REST URL:

GET /query/{queryEngine}/{query}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • queryEngine (string) – Indicates which search engine will be used to handle the query. Supported search engines can be determined through the CNRead.listQueryEngines API call. Transmitted as part of the URL path and must be escaped accordingly.
  • query (string) – The remainder of the URL is passed verbatim to the respective search engine implementation. Hence it may contain additional path elements and query elements as determined by the functionality of the search engine. The caller is reponsible for providing a ‘?’ to indicate the start of the query string portion of the URL, as well as proper URL escaping. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

The structure of the response is determined by the chosen search engine and parameters provided to it.

Return type:

Types.OctetStream

Raises:
CNRead.getQueryEngineDescription(session, queryEngine) → QueryEngineDescription

Provides metadata about the query service of the specified queryEngine. The metadata provides a brief description of the query engine, its version, its schema version, and an optional list of fields supported by the query engine.

v1.1: This method was added.

Version:

1.1, (2.0)

REST URL:

GET /query/{queryType}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate provided with the request. The certificate must be traceable to an authority recognized by DataONE, currently CILogon. Transmitted as part of the SSL handshake process.
  • queryEngine (string) – Indicates which query engine for which to provide descriptive metadata. Currently supported search engines can be determined through CNRead.listQueryEngines. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

A list of fields that are supported by the search index and additional metadata.

Return type:

Types.QueryEngineDescription

Raises:
CNRead.listQueryEngines(session) → QueryEngineList

Returns a list of query engines, i.e. supported values for the queryEngine parameter of the getQueryEngineDescription and query operations.

The list of search engines available may be influenced by the authentication status of the request.

v1.1: This method was added.

Version:

1.1, (2.0)

REST URL:

GET /query

Parameters:

session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate provided with the request. The certificate must be traceable to an authority recognized by DataONE, currently CILogon. Transmitted as part of the SSL handshake process.

Returns:

A list of names of queryEngines available to the user identified by session.

Return type:

Types.QueryEngineList

Raises:
CNRead.synchronize(session, pid) → boolean

Indicates to the CN that a new or existing object identified by PID requires synchronization. Note that this operation is asynchronous, a successful return indicates that the synchronization task was successfully queued.

This method may be called by any Member Node for new content or the authoritative Member Node for updates to existing content.

The CN will schedule the synchronization task which will then be processed in the same way as content changes identified through the listObjects polling mechanism.

v2.0: This method was added to the Version 2.0 API.

Version:

2.0

REST URL:

POST /synchronize

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

True if the synchronization request was successfully queued, otherwise False

Return type:

boolean

Raises:

View API

The CNView API implements methods that enable viewing content on a Coordinating Node. Like the MNView service, the CNView service provides a transformed view of a metadata file, data file, or package. The CNView service provides a default view for all content, and may choose to redirect a review request to the authoritative Member Node for a given PID.

Functions defined in CNView
Tier Version REST Function Parameters
Tier 1 2.0 GET /views/{theme}/{id} view() (session, theme, id) -> Types.OctetStream
Tier 1 2.0 GET /views listViews() (session) -> Types.OptionList
CNView.view(session, theme, id) → OctetStream

Provides a formatted view of an object (science metadata, data, resource, or other) using the given named theme.

The service CNView.view() operation will implement at least one {theme} named ‘default’ to provide a standard (possibly minimalistic) view of the content in HTML format. In addition, a CN may redirect a client to the view service of the authoritative Member Node for a PID if that node has implemented the MNView.view() service and implements a compatible theme.

If the {theme} parameter is not recognized, the service must render the object using the default theme rather than throwing an error. Note that the return type of Types.OctetStream requires that the consuming client has a priori knowledge of the theme being returned (like HTML). Response headers must include the correct mime-type of the view being returned.

v2.0: This method was added to the Version 2.0 API.

Version:

2.0

REST URL:

GET /views/{theme}/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • theme (string) – Indicates which themed view will be used to handle the query. All implementations must support a ‘default’ HTML theme, but are free to implement additional themes that return both HTML and non-HTML responses. Transmitted as part of the URL path and must be escaped accordingly.
  • id (Types.Identifier) – The identifier of the object to render in a view. May be a PID or a SID, the latter acting as if called with the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

Any return type is allowed, including application/octet-stream, but the format of the response should be specialized by the requested theme.

Return type:

Types.OctetStream

Raises:
CNView.listViews(session) → OptionList

Provides a list of usable themes for rendering content in a view, including a required ‘default’ theme. The list of themes is provided as an OptionList, where the option key should be used as the theme name in calls to MNView.view, and the description provides a human readable description of what will be returned fo rthat theme.

v2.0: This method was added to the Version 2.0 API.

Version:

2.0

REST URL:

GET /views

Parameters:

session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.

Returns:

A list of available themes that can be used with the MNView.view service.

Return type:

Types.OptionList

Raises:

Authorization API

Functions defined in CNAuthorization
Tier Version REST Function Parameters
Tier 2 1.0, 2.0 PUT /owner/{id} setRightsHolder() (session, id, userId, serialVersion) -> Types.Identifier
Tier 2 1.0, 2.0 GET /isAuthorized/{id}?action={action} isAuthorized() (session, id, action) -> boolean
Tier 2 1.0, 2.0 PUT /accessRules/{id} setAccessPolicy() (session, id, accessPolicy, serialVersion) -> boolean
CNAuthorization.setRightsHolder(session, id, userId, serialVersion) → Identifier

Changes ownership (RightsHolder) of the specified object to the subject specified by userId

v2.0: The supplied identifier may be a PID or a SID.

Version:

1.0, 2.0

Use Cases:

UC16

REST URL:

PUT /owner/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – Identifier of the object to be modified. May be either a PID or a SID, the latter acting on the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
  • userId (Types.Subject) – The subject that will be taking ownership of the specified object. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • serialVersion (unsigned long) – The serialVersion of the system metadata that is the intended target for the change. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

Identifier of the object that was modified

Return type:

Types.Identifier

Raises:
CNAuthorization.isAuthorized(session, id, action) → boolean

Test if the user identified by the provided token has authorization for operation on the specified object.

A successful operation is indicated by a return HTTP status of 200.

Failure is indicated by an exception such as NotAuthorized being returned.

A successful response is indicated by a response HTTP status of 200. The body of the response is arbitrary and SHOULD be ignored by the caller.

If the action is not authorized, then a NotAuthorized exception MUST be raised.

v2.0: The supplied identifier may be a PID or a SID.

Version:

1.0, 2.0

Use Cases:

UC01, UC02, UC36, UC37

REST URL:

GET /isAuthorized/{id}?action={action}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – The identifer of the resource for which access is being checked. May be either a PID or a SID, the latter returning results as if called with the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
  • action (Types.Permission) – The type of operation which is being requested for the given identifier. Transmitted as a URL query parameter, and so must be escaped accordingly.
Returns:

True if the operation is allowed

Return type:

boolean

Raises:
CNAuthorization.setAccessPolicy(session, id, accessPolicy, serialVersion) → boolean

Sets the access permissions for an object identified by id.

Triggers a change to the system metadata modified time stamp.

Successful completion of this operation is indicated by a HTTP response status code of 200.

Unsuccessful completion of this operation MUST be indicated by returning an appropriate exception such as NotAuthorized.

v2.0: The supplied identifier may be a PID or a SID.

Version:

1.0, 2.0

Use Cases:

UC16

REST URL:

PUT /accessRules/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – The object for which access control is being updated. May be either a PID or a SID, the latter acting on the HEAD PID only. Transmitted as part of the URL path and must be escaped accordingly.
  • accessPolicy (Types.AccessPolicy) – The desired privileges to be assigned to the object. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
  • serialVersion (unsigned long) – The serialVersion of the system metadata that is the intended target for the change. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

True if the operation succeeds, otherwise false.

Return type:

boolean

Raises:

Identity API

Functions defined in CNIdentity
Tier Version REST Function Parameters
Tier 2 1.0, (2.0) POST /accounts registerAccount() (session, person) -> Types.Subject
Tier 2 1.0, (2.0) PUT /accounts/{subject} updateAccount() (session, subject, person) -> Types.Subject
Tier 2 1.0, (2.0) PUT /accounts/verification/{subject} verifyAccount() (session, subject) -> boolean
Tier 2 1.0, (2.0) GET /accounts/{subject} getSubjectInfo() (session, subject) -> Types.SubjectInfo
Tier 2 1.0, (2.0) GET /accounts?query={query}[&status={status}&start={start}&count={count}] listSubjects() (session, query, status, start, count) -> Types.SubjectInfo
Tier 2 1.0, (2.0) POST /accounts/map mapIdentity() (session, primarySubject, secondarySubject) -> boolean
Tier 2 1.0, (2.0) DELETE /accounts/map/{subject} removeMapIdentity() (session, subject) -> boolean
Tier 2 1.0, (2.0) POST /accounts/pendingmap requestMapIdentity() (session, subject) -> boolean
Tier 2 1.0, (2.0) PUT /accounts/pendingmap/{subject} confirmMapIdentity() (session, subject) -> boolean
Tier 2 1.0, (2.0) GET /accounts/pendingmap/{subject} getPendingMapIdentity() (session, subject) -> Types.SubjectInfo
Tier 2 1.0, (2.0) DELETE /accounts/pendingmap/{subject} denyMapIdentity() (session, subject) -> boolean
Tier 2 1.0, (2.0) POST /groups createGroup() (session, group) -> Types.Subject
Tier 2 1.0, (2.0) PUT /groups updateGroup() (session, group) -> boolean
CNIdentity.registerAccount(session, person) → Subject

Create a new subject in the DataONE system.

Note that there should probably be a lot more metadata captured about the new user, and there should be a mechanism for specifying the default access control rules for the new account.

Version:

1.0, (2.0)

Use Cases:

UC16

REST URL:

POST /accounts

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • person (Types.Person) – Information about the Person to be registered with the account, including the real name and email address for the individual. The Subject with the Person must match the subject of the X.509 certificate associated with the authenticated SSL session via client-side authentication, and must not have been registered previously. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

The new subject in the DataONE system. This may be a simple identifier.

Return type:

Types.Subject

Raises:
CNIdentity.updateAccount(session, subject, person) → Subject

Update an existing subject in the DataONE system. The target subject is determined from subject provided in the URL.

The use calling this method must have write access to the account details.

Note that there should be a policy for verifying the details that change via this method.

Version:

1.0, (2.0)

Use Cases:

UC16

REST URL:

PUT /accounts/{subject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The subject of the person being updated. Transmitted as part of the URL path and must be escaped accordingly.
  • person (Types.Person) – New information about the Person. The subject of the Person cannot be updated with this method and must match the subject of the X.509 certificate associated with the authenticated SSL session via client-side authentication. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

The Subject in the DataONE system that was updated.

Return type:

Types.Subject

Raises:
CNIdentity.verifyAccount(session, subject) → boolean

Verify that the Person data associated with this Subject is a true representation of the real world person.

This service can only be called by users who have an administrative role for the domain of users in question.

A successful completion of this operation is indicated by returning a HTTP status of 200.

An exeption MUST be returned if the account verification is not successful.

Version:

1.0, (2.0)

REST URL:

PUT /accounts/verification/{subject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The Subject identifier of the Person to be verified. After this service is called for a subject by an authorized user, the account is marked as verified by this user. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

True if the account verification succeeds, otherwise false.

Return type:

boolean

Raises:
CNIdentity.getSubjectInfo(session, subject) → SubjectInfo

Get the information about a Person (their equivalent identities, and the Groups to which they belong) or the Group (including members).

Version:

1.0, (2.0)

Use Cases:

UC12

REST URL:

GET /accounts/{subject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The Subject identifier of the Person or Group details to be returned. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

The Person or Group details are contained in the returned SubjectList for the given Subject

Return type:

Types.SubjectInfo

Raises:
CNIdentity.listSubjects(session, query, status, start, count) → SubjectInfo

List the subjects, including users, groups, and systems, that match search criteria.

The list can be restricted to subjects whose identifier matches certain substrings, and the size of the resultset can be paged through.

Version:

1.0, (2.0)

REST URL:

GET /accounts?query={query}[&status={status}&start={start}&count={count}]

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • query (string) – A query string criteria to be matched using a case-insensitive substring match against the identifier for the principal, the givenName or familyName of users, and the groupName of groups. The function returns the union of all successful matches against these fields. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • status (string) – When provided, the status field can limit the returned list of Subjects to only those with the given status. Currently the ‘verified’ status is supported. Transmitted as a URL query parameter, and so must be escaped accordingly.
  • start (integer) – The starting record number for the records to be returned (default = 0). Transmitted as a URL query parameter, and so must be escaped accordingly.
  • count (integer) – The maximum number of entries that should be returned in the response. The Member Node may return fewer and the caller should check the total in the response to determine if further pages may be retrieved (default = 100). Transmitted as a URL query parameter, and so must be escaped accordingly.
Returns:

The list of people and groups that match the query.

Return type:

Types.SubjectInfo

Raises:
CNIdentity.mapIdentity(session, primarySubject, secondarySubject) → boolean

Create a new mapping between the two identities, asserting that they represent the same subject.

Mapping identities with this method requires explicit authorization for the user given in the Session object. The caller must have made sure that the primary and secondary identities represent one and the same individual.

Successful completion of the request is indicated by returning a HTTP status of 200.

A failed request MUST be indicated by returning an appropriate exception and setting the response HTTP status accordingly.

Version:

1.0, (2.0)

REST URL:

POST /accounts/map

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. Transmitted as part of the SSL handshake process.
  • primarySubject (Types.Subject) – The Subject identifier that will have a mapped identity to the other given subject. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • secondarySubject (Types.Subject) – The Subject identifier that will have a mapped identity to the other given subject. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

True if the mapping was successfully initiated, false otherwise.

Return type:

boolean

Raises:
CNIdentity.removeMapIdentity(session, subject) → boolean

Removes a previously asserted identity mapping from the Subject in the Session to the Subject given by the parameter. The reciprocol mapping entry is also removed.

A successful request is indicated by returning a HTTP status of 200.

A failed request MUST be indicated by returning an appropriate exception and setting the response HTTP status accordingly.

Version:

1.0, (2.0)

REST URL:

DELETE /accounts/map/{subject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The Subject identifier to be used for equivalentIdentity. This Subject will not match the Subject named in the certificate. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

True if the map was successfully created, false otherwise.

Return type:

boolean

Raises:
CNIdentity.requestMapIdentity(session, subject) → boolean

Request a new mapping between the authenticated identity in the session and the given identity, asserting that they represent the same subject.

Mapping identities is a two-step process wherein a map request is made by a primary Subject and a subsequent (confirmation) map request is made by the secondary Subject. This ensures that mappings are performed only by those that have authority to do so.

Successful completion of the request is indicated by returning a HTTP status of 200.

A failed request MUST be indicated by returning an appropriate exception and setting the response HTTP status accordingly.

Version:

1.0, (2.0)

REST URL:

POST /accounts/pendingmap

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The Subject identifier to be used for equivalentIdentity. This Subject will not match the Subject named in the certificate. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

True if the mapping was successfully initiated, false otherwise.

Return type:

boolean

Raises:
CNIdentity.confirmMapIdentity(session, subject) → boolean

Confirms a previously initiated identity mapping. If subject A asserts that B is the same identity through CNIdentity.requestMapIdentity(), then this method is called by B to confirm that assertion.

A successful request is indicated by returning a HTTP status of 200.

A failed request MUST be indicated by returning an appropriate exception and setting the response HTTP status accordingly.

Version:

1.0, (2.0)

REST URL:

PUT /accounts/pendingmap/{subject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The Subject identifier to be used for equivalentIdentity. This Subject will not match the Subject named in the certificate. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

True if the map was successfully created, false otherwise.

Return type:

boolean

Raises:
CNIdentity.getPendingMapIdentity(session, subject) → SubjectInfo

Gets the SubjectInfo of a previously initiated identity mapping.

A successful request is indicated by returning a HTTP status of 200.

A failed request MUST be indicated by returning an appropriate exception and setting the response HTTP status accordingly.

Version:

1.0, (2.0)

REST URL:

GET /accounts/pendingmap/{subject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The Subject identifier to be used for equivalentIdentity. This Subject will not match the Subject named in the certificate. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

The SubjectInfo

Return type:

Types.SubjectInfo

Raises:
CNIdentity.denyMapIdentity(session, subject) → boolean

Denies a previously initiated identity mapping. If subject A asserts that B is the same identity through CNIdentity.requestMapIdentity(), then this method is called by B to deny that assertion.

A successful request is indicated by returning a HTTP status of 200.

A failed request MUST be indicated by returning an appropriate exception and setting the response HTTP status accordingly.

Version:

1.0, (2.0)

REST URL:

DELETE /accounts/pendingmap/{subject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. Transmitted as part of the SSL handshake process.
  • subject (Types.Subject) – The Subject identifier to be used for equivalentIdentity. This Subject will not match the Subject named in the certificate. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

True if the map was successfully created, false otherwise.

Return type:

boolean

Raises:
CNIdentity.createGroup(session, group) → Subject

Create a group with the given name.

Groups are lists of subjects that allow all members of the group to be referenced by listing solely the subject name of the group. Group names must be unique within the DataONE system. Groups can only be modified by Subjects listed as rightsHolders.

Version:

1.0, (2.0)

REST URL:

POST /groups

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • group (Types.Group) – The Group to be created. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

The Subject of the group that was created.

Return type:

Types.Subject

Raises:
CNIdentity.updateGroup(session, group) → boolean

Add members to the named group.

Group members can be modified only by the original creator of the group, otherwise a NotAuthorized exception is thrown. Group members are provided as a list of subjects that replace the group membership.

Successful completion of this operation is indicated by a HTTP response status code of 200.

Unsuccessful completion of this operation MUST be indicated by returning an appropriate exception.

Version:

1.0, (2.0)

REST URL:

PUT /groups

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session is used to determine if the request is being made by the creator of the group. Transmitted as part of the SSL handshake process.
  • group (Types.Group) – The new Group object that will replace the old Group. The Group.Subject must match the groupName and an update cannot modify this value. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

True if the group that was modified successfully, false otherwise

Return type:

boolean

Raises:

Replication API

The Data Replication API operates in conjunction with the MNReplication API to assist with the replication of data and science metadata content between Member Nodes to ensure that copies of data and metadata can be retrieved from more than one Member Node where possible.

Functions defined in CNReplication
Tier Version REST Function Parameters
Tier 4 1.0, (2.0) PUT /replicaNotifications/{pid} setReplicationStatus() (session, pid, nodeRef, status, failure) -> boolean
Tier 4 1.0, (2.0) PUT /replicaMetadata/{pid} updateReplicationMetadata() (session, pid, replicaMetadata, serialVersion) -> boolean
Tier 4 1.0, 2.0 PUT /replicaPolicies/{id} setReplicationPolicy() (session, id, policy, serialVersion) -> boolean
Tier 4 1.0, (2.0) GET /replicaAuthorizations/{pid}?targetNodeSubject={targetNodeSubject} isNodeAuthorized() (session, targetNodeSubject, pid) -> boolean
  1.0, (2.0) PUT /removeReplicaMetadata/{pid} deleteReplicationMetadata() (session, pid, nodeId, serialVersion) -> boolean
CNReplication.setReplicationStatus(session, pid, nodeRef, status, failure) → boolean

Update the replication status of the system metadata, ensuring that the change is appropriate for the given state of system metadata. For example, a MN can not change the status to COMPLETED unless the CN previously requested replication of the object and the replications status of the object (as indicated in the system metadata) is set to QUEUED.

Successful completion of this operation is indicated by a HTTP response status code of 200.

Unsuccessful completion of this operation MUST be indicated by returning an appropriate exception.

The nodeRef, status, and failure parameters are transmitted as part of the HTTP request body encoded as a MIME Multipart/form-data encoded payload.

This method can be only called by Coordinating Nodes and trusted Member Nodes.

Version:

1.0, (2.0)

Use Cases:

UC09

REST URL:

PUT /replicaNotifications/{pid}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – Identifier of the object to be replicated between Member Nodes. Transmitted as part of the URL path and must be escaped accordingly.
  • nodeRef (Types.NodeReference) – Reference to the Node which made the setReplicationStatus call. If this is a Member Node, the checksum must be compared with that of the authoritative Member Node. If not, this step can be ignored as the call is not signifying a replication is complete. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • status (Types.ReplicationStatus) – Replication status. See system metadata schema for possible values. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • failure (Types.BaseException) – A BaseException object or one of it’s subclasses, or null. If the status is set to ‘failed’, this exception object can provide more detail. Appropriate sub-classes include InsufficientResource, NotAuthorized, ServiceFailure, etc. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

True if the operation is allowed and expected, otherwise an exception should be raised.

Return type:

boolean

Raises:
CNReplication.updateReplicationMetadata(session, pid, replicaMetadata, serialVersion) → boolean

Replaces the replica with matching nodeRef in the system metadata of the specified object. Adds a new replica if the nodeRef of passed in Replica is not already present. Changes the date sys meta modified.

Successful completion of the operation is indicated by returning a HTTP status of 200.

Failure of the operation MUST be indicated by returning an appropriate exception.

This method can be only called by Coordinating Nodes.

Version:

1.0, (2.0)

REST URL:

PUT /replicaMetadata/{pid}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – Transmitted as part of the URL path and must be escaped accordingly.
  • replicaMetadata (Types.Replica) – Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
  • serialVersion (unsigned long) – The serialVersion of the system metadata that is the intended target for the change. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

True on success

Return type:

boolean

Raises:
CNReplication.setReplicationPolicy(session, id, policy, serialVersion) → boolean

Updates the replication policy entry for an object by updating the system metadata.

Successful completion of the operation is indicated by returning a HTTP status of 200.

Failure of the operation MUST be indicated by returning an appropriate exception.

v2.0: The identifier may be a PID or SID.

Version:

1.0, 2.0

REST URL:

PUT /replicaPolicies/{id}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • id (Types.Identifier) – The identifier of the policy being updated. May be either a PID or a SID, the latter acting only on the HEAD PID. Transmitted as part of the URL path and must be escaped accordingly.
  • policy (Types.ReplicationPolicy) – Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
  • serialVersion (unsigned long) – The serialVersion of the system metadata that is the intended target for the change. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

True on success

Return type:

boolean

Raises:
CNReplication.isNodeAuthorized(session, targetNodeSubject, pid) → boolean

Verifies that a replication event was initiated by a CN by comparing the target node’s identifiying subject with a known list of scheduled replication tasks.

Successful completion of the operation is indicated by returning a HTTP status of 200.

Failure of the operation MUST be indicated by returning an appropriate exception.

Version:

1.0, (2.0)

REST URL:

GET /replicaAuthorizations/{pid}?targetNodeSubject={targetNodeSubject}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • targetNodeSubject (Types.Subject) – The subject that identifies the target node, with a value extracted from the X.509 certificate passed in during the call to MNReplication.replicate(). Transmitted as a URL query parameter, and so must be escaped accordingly.
  • pid (Types.Identifier) – The identifier of the object to be replicated. Transmitted as part of the URL path and must be escaped accordingly.
Returns:

True on success

Return type:

boolean

Raises:
CNReplication.deleteReplicationMetadata(session, pid, nodeId, serialVersion) → boolean

Removes the replication information for the specified node from the object system metadata identified by pid.

Removal of replication metadata is necessary if the Member Node goes offline permanently or for an extended period, or when it is deeemed prudent to migrate an object from one node to another to address resource management issues.

This method can be only called by Coordinating Nodes.

Version:

1.0, (2.0)

REST URL:

PUT /removeReplicaMetadata/{pid}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session MUST be a Coordinating Node. Transmitted as part of the SSL handshake process.
  • pid (Types.Identifier) – The identifier of the object whose replication metadata is being modified. Transmitted as part of the URL path and must be escaped accordingly.
  • nodeId (Types.NodeReference) – The identifier of the node replication information that is being removed from the system metadata record. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
  • serialVersion (unsigned long) – The Types.SystemMetadata.serialVersion of the system metadata being updated. This MUST match the latest version of system metadata available for the object on the Coordinating Node. Transmitted as a UTF-8 String as a Param part of the MIME multipart/mixed message.
Returns:

True if the replication metadata was successfully deleted.

Return type:

boolean

Raises:
  • Exceptions.NotImplemented

    (errorCode=501, detailCode=4950)

    The method functionality if not fully implemented

  • Exceptions.ServiceFailure

    (errorCode=500, detailCode=4951)

    An internal server error occurred that prevented the operation from completing.

  • Exceptions.InvalidRequest

    (errorCode=400, detailCode=4952)

    The request parameters are malformed

  • Exceptions.InvalidToken

    (errorCode=401, detailCode=4953)

    The supplied session is invalid

  • Exceptions.NotFound

    (errorCode=404, detailCode=4956)

    The object identified by pid or the node reference specified by nodeId could not be located in the system metadata for the object.

  • Exceptions.NotAuthorized

    (errorCode=401, detailCode=4954)

    The subject identified by the session information does not have appropriate priviledges for modifiying the content or accessing the service.

  • Exceptions.VersionMismatch

    (errorCode=409, detailCode=4955)

    The serialVersion does not match the current Types.SystemMetadata.serialVersion value of the object system metadata.

This old stuff is commented out but kept here for revisiting later .. function:: getDefaultReplicationPolicy (sess)

CNReplication.getMNReplicateList()
CNReplication.getReplicationPolicy(sess, ID)
CNReplication.isReplicationNeeded()
CNReplication.replicateMetadata()
CNReplication.setDefaultReplicationPolicy(sess, policy)
CNReplication.setReplicationPolicy(sess, policy, ID)

Register API

The register API methods are used to maintain a registry of nodes participating in the DataONE infrastructure.

Note that the node registry is much the same as the Object collection with a restriction on the returned object formats to be Member Nodes or Coordinating Nodes. It may be prudent for the implementation of the registration API to leverage the existing functionality of the object collection rather than implementing a parallel data store. In this case, the “science metadata” could be a DC description of the node, and the “data” might be the detailed registration information including node capabilities, scheduling and so forth.

Functions defined in CNRegister
Tier Version REST Function Parameters
Tier 2 1.0, 2.0 PUT /node/{nodeid} updateNodeCapabilities() (session, nodeid, node) -> boolean
Tier 2 1.0, 2.0 GET /node/{nodeid} getNodeCapabilities() (nodeid) -> Types.Node
Tier 2 1.0, 2.0 POST /node register() (session, node) -> Types.NodeReference
CNRegister.updateNodeCapabilities(session, nodeid, node) → boolean

For updating the capabilities of the specified node. Most information is replaced by information in the new node, however, the node identifier, nodeType, ping, syncrhonization.lastHarvested, and synchronization.lastCompleteHarvest are preserved from the existing entry. Services in the old record not included in the new Node will be removed.

Successful completion of this operation is indicated by a HTTP response status code of 200.

Unsuccessful completion of this operation MUST be indicated by returning an appropriate exception.

v2.0: The structure of v2_0.Types.Node has changed.

Version:

1.0, 2.0

REST URL:

PUT /node/{nodeid}

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • nodeid (Types.NodeReference) – The identifier of the existing node entry being updated. Transmitted as part of the URL path and must be escaped accordingly.
  • node (Types.Node) – An instance of :class`Types.Node` that contains the updated information. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

True if operation is successful

Return type:

boolean

Raises:
CNRegister.getNodeCapabilities(nodeid) → Node

For retrieving the capabilities of the specified node if it is registered on the Coordinating Node being called.

v2.0: The structure of v2_0.Types.Node has changed.

Version:

1.0, 2.0

REST URL:

GET /node/{nodeid}

Parameters:

nodeid (Types.NodeReference) – The identifier of the existing node entry being looked up. Transmitted as part of the URL path and must be escaped accordingly.

Returns:

An instance of :class`Types.Node` that contains the Node information.

Return type:

Types.Node

Raises:
CNRegister.register(session, node) → NodeReference

Register a new node in the system. If the node already exists, then a IdentifierNotUnique exception MUST be returned.

v2.0: The structure of v2_0.Types.Node has changed.

Version:

1.0, 2.0

REST URL:

POST /node

Parameters:
  • session (Types.Session) – Session information that contains the identity of the calling user as retrieved from the X.509 certificate which must be traceable to the CILogon service. The subject of the session defaults to the public user if the certificate was not provided with the request. Transmitted as part of the SSL handshake process.
  • node (Types.Node) – An instance of Types.Node that fully describes the node being registered. Note that some attributes will be set by the Coordinating Node. Transmitted as an UTF-8 encoded XML structure for the respective type as defined in the DataONE types schema, as a File part of the MIME multipart/mixed message.
Returns:

The identifier of the new node entry if successful, otherwise an error is raised.

Return type:

Types.NodeReference

Raises: