Specifications for Hardware Implementing the CNsΒΆ
The plan is to have identical hardware for the CNs to minimize issues during installation and configuration - if it works for one, then we expect it will work for all.
The hardware selected for running the CNs is based on Dell R905 4u rack mounted servers. They are running four quad-core Opterons at 2.4GHz with 64GB of RAM.
| Item Number | Quantity | Item Description |
|---|---|---|
| 224-3104 | 1 | R905 2x Quad Core Opteron 8378, 2.4GHz, 4x512K Cache, HT1 |
| 311-9697 | 1 | Upgrade to Four Quad Core Opteron 8378 2.4GHz |
| 311-9834 | 1 | 64GB 800MHZ (16X4GB) |
| 311-8713 | 1 | LOM NICs are TOE, iSCSI Ready (R905/805) |
| 313-9126 | 1 | DVD-ROM Drive, Internal |
| 313-6069 | 1 | PowerEdge R905 Active Bezel |
| 341-6185 | 1 | 1X5 SAS Backplane, for 3.5 Inch SAS Hard Drives only, PowerEdge R905 |
| 341-6177 | 1 | Internal PERC RAID Controller, 3 to 8 Hard Drives in RAID 5 config |
| 341-8934 | 4 | 600GB 10K RPM Serial-Attach SCSI 3Gbps 3.5-in HotPlug Hard Drive |
| 330-5280 | 1 | Electronic System Documentation, OpenManage DVD Kit with DMC |
| 310-8509 | 1 | NEMA 5-15P to C13 Wall Plug, 125 Volt, 15 AMP, 10 Feet (3m), Power Cord |
| 430-2713 | 1 | 4x Broadcom® NetXtreme II 5708 1GbE Onboard NICs with TOE |
| 990-6038 | 1 | 4 Year ProSupport for IT and Mission Critical 4HR 7x24 Onsite Pack |
| 313-6364 | 1 | Dell Remote Access Card, 5th Gen, R905 |
